Preparing for Insertion Cleanliness is the first and most Important aspect of proper contact lens care. Establish a routine of good hygiene for handling your lenses.
| ||
- Insertion of Lens To avoid mix-ups, develop the habit of always inserting the first lens in your tight eye. Before inserting the lens, check to see it is free of any nicks or tears. If it appears damaged, throw it away. Check the lens has not turned inside out. Place the lens on the tip of your forefinger and hold above eye level; you are looking at the bowl of the lens from the outside
Usually, the lens centers itself automatically on the middle of your eye when insert it and will very rarely be displaced on to the white of your eye during wear. However, this can occur if insertion and removal are not performed properly. To center a lens, follow either of these methods.
Always remove the same lens first. Wash, rinse and dry your hands thoroughly. Always ensure that the lens is on the middle of your eye before attempting to remove it. To locate the lens, inspect the upper area of the eye by looking down into a mirror while pulling the upper lid up. Then inspect the lover area by pulling the lower lid down. Once you have found the lens, you can remove it by using the pinch method introduced below or any other method recommended by your Eye Care Practitioner.
|
Insertion of Lens
Subscribe to:
Posts (Atom)